WSS Grenadier "Wiking" - Alpine Miniature Review

planetFigure

Help Support planetFigure:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Guy

A Fixture
Joined
Aug 20, 2003
Messages
12,741
Location
US, Oklahoma
Alpine Miniatures Review
16003
WSS Grenadier "Wiking"
1/16th scale resin
Sculpted by Pongsatorn Kanthaboon
Painted by Gino Poppe
16 resin parts

Alpine 01.jpg

Taesung Hamms brings us another 1/16th scale resin figure depicting the German WSS Grenadier "Wiking" division.

Alpine 02.jpg

This kit comes in a sturdy green box with all the parts in separate bags to ensure against loss and layered between sections of foam to guard against breakage.

Alpine 03.JPG Alpine 04.JPG

Alpine 05.JPG Alpine 06.JPG

The figure comes with an alternate head with helmet.

Alpine 07.JPG Alpine 08.JPG

Alpine 09.JPG

Above you see both selections of heads.

Alpine 11.JPG Alpine 12.JPG

Alpine 10.JPG

Above is the separate cast helmet to use with the head right above.

[ continued in next post ]


 

Alpine 13.JPG Alpine 14.JPG

Alpine 15.JPG Alpine 16.JPG

Above is the upper torso / chest showing the attention to detail sculpted into the jacket and the fur lined hood.

Alpine 17.jpg Alpine 18.jpg

Alpine 19.jpg Alpine 20.jpg

Above is the lower torso / legs showing the attention to detail in the stitching.

Alpine 21.JPG Alpine 22.JPG

The right and left boots are cast separately and dry-fitted snuggly into their respective sockets.

Alpine 23.JPG Alpine 24.JPG

Above is the left arm and gloved hand with one of the photos showing the detail of the shirt cuff exposed at the wrist.

Alpine 25.JPG Alpine 26.JPG

Above is the right arm with gloved hand holding the weapon.

[ continued in next post ]


 

Alpine 28.JPG Alpine 29.JPG

Above you see both sides of the straps.

Alpine 30.JPG

Alpine 31.JPG Alpine 32.JPG

The top photo above shows the separate cast pistol and holster. The bottom two photos show the front and back of the binoculars.

Alpine 33.jpg

Above are the two separate cast ammo pouches.

Additional Box Art Photographs

Alpine 34.jpg

Alpine 35.jpg Alpine 36.jpg

Alpine 37.jpg Alpine 38.jpg

Conclusion:
An excellent figure produced by Alpine Miniatures with minimal seam lines and casting blocks to remove. The detail is clean and sharp and dry-fitment was excellent. Highly recommended.

Alpine Miniatures web-site
click here

R230
 
Thank Guy for the review.
Very nice Detail and the castings look very crisp too.
Nice to see more 1/16 scale figures out there....
Keep up the great work Alpine Miniature's !!!!

Andy
 

Latest posts

Back
Top