1. Copying kits is a crime that hurts original artists & producers. Help support your favorite artists by buying their original works. PlanetFigure will not tolerate any activities related to recasting, and will report recasters to authorities. Thank you for your support!

SBS, Come dipingo/How do I paint! Primo step: preparazione e mano di fondo. First ste

Discussion in 'Friends of planetFigure' started by gioazz, Nov 21, 2009.

  1. gioazz Active Member

    Country:
    Italy
    Il primo articolo del mio Blog e' dedicato al mio metodo di preparazione e pittura di un soldatino in 54 mm da scatola.
    Per prima cosa inizio con il pulire il pezzo, eliminare le linee di fusione, inserire dei perni in acciaio dove necessario, facendo fori con un trapano a mano ed infine incollando quanto piu' possibile i pezzi.
    A questo punto, aggiungo sempre qualcosa di personale, per differenziare il soldatino, aggiungendo particolari anche minimi.
    In questo caso, una t-shirt sotto la camicia.

    My first article on my blog is a SBS on how I prepare and paint a 54mm miniature out of the box.
    First of all I clean the parts, file the casting lines; with a manual drill I make holes to insert, where needed, steel plugs and I glue together as many part as possible.
    Any piece I made, has to have something personal, in this case I added a t-shirt under the shirt, as seen in many photograph of the period.



    [IMG]
    [IMG]

    Nelle due foto precedenti, potete inoltre notare che il fucile BAR e' ricoperto, per le parti metalliche di una sostanza viola, un mascherante liquido, per evitare che la vernice di fondo attacchi.
    Questo accorgimento e' utilizzato perche' per dipingere i metalli uso una tecnica che sfrutta la lucentezza stessa del metallo, una volta spruzzato il primer, basta intervenire con un paio di pinzette ed asportare il liquido mascherante che portera' con se la vernice, come si puo' notare dalle foto seguenti.

    In the pictures above you have noticed that the BAR rifle has a purple coats on the metal parts, this is a masking agent to avoid undercoat paint to stick on the metallic parts.
    I use this technique because I like to paint metallic parts, using the shine of the bare metal itself.
    Once the undercoat is dry, with a pair of pliers, you can easily remove the masking agent, as you can see from the pics below.

    [IMG]

    [IMG]

    [IMG]

    A presto con il prossimo capitolo sull'incarnato.

    See you soon with the next chapter on painting flesh tone.

    Ciao!

    Giovanni[IMG]


    More...

Share This Page

planetFigure Links

Reviews & Open Box
Buy. Sell & trade
Articles
Link Directory
Events
Advertising

Popular Sections

Figure & Minis News
vBench - Works in Progress
Painting Talk
Sculpting Talk
Digital Sculpting Talk
The Lounge
Report Piracy

Who we are

planetFigure is a community built around miniature painters, sculptors and collectors, We are here to exchange support, Information & Resources.

© planetFigure 2003 - 2022.