1. Copying kits is a crime that hurts original artists & producers. Help support your favorite artists by buying their original works. PlanetFigure will not tolerate any activities related to recasting, and will report recasters to authorities. Thank you for your support!

Panzerart USMC Tank Crew

Discussion in 'vBench (Works in Progress)' started by Kimmo, Oct 16, 2021.

  1. Kimmo A Fixture

    Next on the workbench is a small jungle vignette with one of Panzerart's resin figures in 1/35 scale. This is my first from them and will definitely be getting some more in the future. Well sculpted and cast, even if there was a bit more seam cleanup needed on the pants then one would like. You get two head options, with and without helmet. My only niggle here is the chin strap is too thin with no buckle detail, but that could be replaced if you wish. The cover should be a bit more lumpy for total accuracy, but will suffice. The uniform looks fine for a P41, and the shotgun looks good to boot. Nice change of pace there. The base is made up with cork bark, twisted wire for the roots, fine scatter for moss, Kamizukuri plants and the ground work is bark residue (from me having to grind off a good chunk with a mini burr) with some acrylic resin dust from sanding down the fill with bits and chunks of stuff thrown in, topped off with leaf scatter. The scene is pretty much set, the leaves will be re-positioned once the painting is done, and I will probably add more moss and leaf scatter once I see how this looks under paint.


    PA161855.JPG


    PA161853.JPG


    PA161854.JPG


    A bit more cleanup with the fill on the sides of the base and I can get priming.

    Kimmo
    Oda, T-34/85, aknific and 9 others like this.
  2. 1969 A Fixture

    Country:
    United-Kingdom
    Really like the base you have made for the figure, very nice.
    Steve
  3. Viking Bob PlanetFigure Supporter

    Country:
    United-Kingdom
    Following this one, excellent groundwork.
  4. Chris Oldfield A Fixture

    Country:
    England
    Thanks for the detailed SBS on how you made the groundwork Kimmo, very informative.
    Watching with interest!
  5. Nap Moderator

    Country:
    England
    Hi Kimmo

    Just pulled my comfortable chair up watching this closely

    Like the concept on the piece ...good to hear what you used on the groundwork and it certainly looks really effective

    Is this based on a picture perhaps ?

    Following as always .....do you normally keep to the smaller scales ?

    Nap
    Oda likes this.
  6. Kimmo A Fixture

    Cheers Steve, Bob, Chris and Nap! Nothing like a good sized audience to keep you on your toes...


    Nap, my default scale is 1/35 since I've been building a lot of armour and whatnot in that scale for ages, it's the best compromise for size, cost and variety. These days you can find pretty much anything and everything under the sun. My goal is to really improve in the groundwork and face painting department over the next year. Painting in larger scales gives me a ton of useful info and practice, then the trick is to scale it down which doesn't always work just like that. The scene is just me and my imagination run amok. I was originally toying with a riverbed and mangrove scene, but not enough vegetation to work with, and the tree would take some time as well. This was an easier option since I have plenty of good sized cork bark to work with and some laser cut plants to play with. If you ever get a chance to grab some larger chunks of cork bark, do so, fantastic stuff for natural rock face especially in this scale but works well up to 75mm, and all the off cuts and crumbly bits work well for debris and so on.

    Kimmo
    Nap, Chris Oldfield and Babelfish like this.
  7. Babelfish A Fixture

    Country:
    United-Kingdom
    Love the basing. Twisted wire for roots is a great idea (*makes a mental note). Never seen the figure before, looks good.

    - Steve
    Oda likes this.
  8. Kimmo A Fixture

    Cheers Steve!

    It's the same as making a wire tree, wrap around, double up as needed. I coated everything with a mix of PVA , Surface Primer and some of the grit from the groundwork for texture. The glue and primer remain flexible so you can bend to shape after the fact.


    Finally got some paint down, and things are looking good after a good 3-4 hours. I wanted to get a pale skinned guy with a bit of dirt and sun but not saturated so I started off with a base of Cork and Light Skin from the Malefic set. It has a bit of a purply tone and gives you a nice pasty look when combined with cork brown. I added washes of reddish brown, violet and some camo black brown until I got the shading and tones I was after. Then the usual highlighting and more toning down. I haven't done 5 o'clock shadow much but decided he'd probably need some and am pleased with how that's come out. Violet, camo black brown and stipple away. I went over it with a mid skin tone and then another glaze. I decided not to go overboard with the fading on the uniform so needed a good green to start with and chose Yellow Olive, mix in US Tank Crew highlight and deck tan to lighten it to taste. More violet is used in the shadows. The base got a quick and dirty 30 minute session to block in the colours, you do not want to be terribly neat at this stage, nor use a good brush. Work quickly and use thinner and glaze medium so you can wet blend and much about. Even with the workbench lighting, this looks pretty darn nice.


    PA181856.JPG


    PA181857.JPG


    PA181858.JPG

    And colour references

    PA181861.JPG


    PA181860.JPG


    PA181859.JPG


    Still a fair ways to go, but I'm more than happy so far.

    Kimmo
    Oda, T-34/85, Nap and 3 others like this.
  9. Babelfish A Fixture

    Country:
    United-Kingdom
    And so you should be! Even if you called time on it now, it'd still be a tremendous job.

    - Steve
    Oda likes this.
  10. Nap Moderator

    Country:
    England
    Hi Kimmo

    Can't beat a bit of vegetation eh ! .....really starting to come already along ...and so quickly

    Thanks for sharing the paints and techniques you use for base work

    Look forward to more from the bench

    Happy modelling

    Nap
    Oda likes this.
  11. Kimmo A Fixture

    Cheers Steve and Nap!

    This is moving along surprisingly well and fairly quickly, even though there was a lot of fiddly stuff to be done today. I got the helmet more or less done, something's not quite right and need a think with fresh eyes. I brought in Dead Flesh and Military Green for the base colour and darker splotches, the browns and tan were mixed up with what was on the palette. I gave the EGA and USMC a shot, not the greatest and will have to try and clean it up a bit or redo it. Fortunately it can be faded down if all else fails. The groundwork got a bit of definition as well.


    PA191862.JPG


    PA191863.JPG


    PA191864.JPG


    Still a couple of sessions at least.

    Kimmo
  12. Nap Moderator

    Country:
    England
    Goodness you are painting quickly on this

    Think the helmet needs a bit more definition

    Groundwork is looking good now ......dare I suggest a water feature running down .....

    Happy session time

    Nap
  13. Kimmo A Fixture

    Cheers Nap!

    I decided to redo the helmet, I think it looks better now. The annoying thing about painting camo this small is that the pattern does a distressingly good job of what it is supposed to do, namely break up outlines and confuse the eye. The figure is almost done now, I added some light "dirt" glazes to the uniform and went a little heavier around the knees, shirttail and butt. I might add some more when I've had a chance to look at things with fresh eyes. The groundwork wasn't really touched except for a few highlights and shadows, inks will be needed for the next phase, and there might just be some moisture involved...


    PA201865.JPG



    PA201866.JPG



    PA201867.JPG


    Kimmo
  14. Nap Moderator

    Country:
    England
    Hi Kimmo

    That helmet looks so much better now , sure you will sort the weathering out to your satisfaction

    Another piece nearly finished , you must have a great collection

    Nap
  15. Kimmo A Fixture

    Cheers Nap!

    Not much of a collection, I try to get stuff sold off because I have no display space. I don't get too emotionally attached to any of my projects, better that they go to someone who can display and enjoy them. Plus, there's never too much money at hand...

    Got the foliage mostly sorted out today, a few touches here and there on the base and the figure. The greens need a bit more oomph.


    PA201868.JPG


    PA201869.JPG


    PA201870.JPG


    The overhang on the left will most likely get trimmed off like so


    chop.JPG


    I'll try and get the inks down tomorrow, then I can probably glue him in place and make adjustments as needed.


    Kimmo
  16. Nap Moderator

    Country:
    England
    Hi Kimmo

    Another good update and another nearly finished ...I agree ref the overhang

    Happy benchtime

    Nap
  17. Kimmo A Fixture

    Cheers Nap!


    I think we're just about done. I touched up a few things, did the inks and played with varnishes. The inks really helped bring out some tones and add a touch of depth. I used a bit of gloss to simulate moisture/water around the moss and down cracks in the rock face, made sure the uniform was dead flat and gave the leaves, skin and weapon a light coat of satin. The sweat stain also got a thin line of 50/50 mix of matt and satin for added dampness. It doesn't quite show up under the bench lights, but it does make the skin look moist in real life and obviously gives a bit of a sheen to the other stuff that should have a sheen.


    PA211871.JPG


    PA211872.JPG


    PA211873.JPG


    The base sides needs a coat of varnish, and then good photos after one final fresh eyes check.

    Kimmo
  18. Steve Brodie PlanetFigure Supporter

    Country:
    United-Kingdom
  19. Nap Moderator

    Country:
    England
    Hi Kimmo

    Good finishing touches , good use of the inks and varnishes

    Thanks for SBS ..enjoying to follow

    Look forward to the next

    Happy benchtime

    Nap
  20. Kimmo A Fixture

    Cheers Steve and Nap!

    Got photos taken and am in the process of whittling the pile down from the original 100. I tend to get carried away and take as many as I can in the hopes you get 4 or 5 really good ones. I used a white and a black background and noticed how the camera's sensor reads either background really differently. I've understood for a long time that the exposure needs to be dropped for a dark background, but hadn't appreciated how much the tones will change as well given that the light source, angle, aperture and focal length is the same in both cases as seen below.


    14.JPG

    24.JPG


    I'll get the edited pile of 34 down to a dozen in the next day or so.

    Kimmo
    1969, Nap, Nordman and 1 other person like this.

Share This Page

planetFigure Links

Reviews & Open Box
Buy. Sell & trade
Articles
Link Directory
Events
Advertising

Popular Sections

Figure & Minis News
vBench - Works in Progress
Painting Talk
Sculpting Talk
Digital Sculpting Talk
The Lounge
Report Piracy

Who we are

planetFigure is a community built around miniature painters, sculptors and collectors, We are here to exchange support, Information & Resources.

© planetFigure 2003 - 2022.