1. Copying kits is a crime that hurts original artists & producers. Help support your favorite artists by buying their original works. PlanetFigure will not tolerate any activities related to recasting, and will report recasters to authorities. Thank you for your support!

WIP Imperial Gallery 24th Foot - Rorke's Drift

Discussion in 'vBench (Works in Progress)' started by Richie, Sep 14, 2013.

  1. Funky50 Guest

    This looks really impressive Richie.....you've done a magnificent job on this so far ...can't wait to get my hands on one.....Hope I can do it justice like you.....Kevin
  2. Richie A Fixture

    Country:
    United-Kingdom
    Hi Ron,
    Thank you, I've never done so much work in 6 days, good job I've been off work. He's getting there, when they are photographed with the Rorke's Drift background the finishing post is in sight.(y)
    cheers
    Richie
  3. Richie A Fixture

    Country:
    United-Kingdom
    Hi Kevin,
    Thank you for the huge compliment, hopefully won't be too long before you get your wish mate, I'm sure you will do a fine job. It is a precise build as it is very well engineered, but well worth it, I have really enjoyed working on this.(y)
    cheers
    Richie
  4. ACCOUNT_DELETED A Fixture

    Country:
    Canada
    Richie - I love the photos against the painting. He looks real. You have done a great job on this piece....I especially liked the close-ups of the Martini.

    Colin
  5. Richie A Fixture

    Country:
    United-Kingdom
    Hi Colin,
    Thank you mate, I will take that as a great compliment from someone of your talent. The back drop as previously mentioned does set him off a bit, I wish I new how to use one of the photo packages so I could put in the picture better.(y)
    cheers
    Richie
    crf likes this.
  6. Wings5797 A Fixture

    Country:
    France
    Hi Richie,
    I totally agree with Ron your greatest yet.
    At first I thought that you had gone for a diorama and gone for the film based white helmet. On closer inspection it came clear that the regiment are the lids on your paints. Should have gone to spec savers.
    Seriously Mate this is a really great piece and you should be truely proud of what has been achieved here.
    I can hardly wait for you to do your magic with the horsehair.
    Good work Richie,
    All the very best,
    Keith
    Helm likes this.
  7. Richie A Fixture

    Country:
    United-Kingdom
    Hi Keith,
    Thank you mate, I might just have another one of these when I build my big dio that you lot have been goading me about:whistle: . I just might have to have a sprig or two of the old horsehair?(y)
    cheers
    Richie
    Wings5797 likes this.
  8. pte1643 Active Member

    Great work.

    I'm currently (Very slowly) working on the similar Verlinden 24th figure.

    Can I just ask... The helmet staining is a given, but I was planning on doing the Slade Wallace equip White and Brass... Is it preferred in White or Stained and Blackened?
  9. Richie A Fixture

    Country:
    United-Kingdom
    Hi pte1643,
    Thanks for looking in and the nice words, I like that Verlinden figure you are working on, I have done a couple of conversions from them but have not built one as a 24th figure as it should be, as yet, anyway the only thing that really lets it down is the beard/head.

    As for the valise equipment, it is up to your personal preference but I would stain, but black definitely not. Black was worn by the rifles as I remember but not by the 24th in 1879. Generally on active service the equipment would be stained or pipeclayed. The main reason is the red tunics would have faded to all shades and from a distance as viewed by the Zulu's they would have looked brownish so if the equipment was stained they could not determine if the soldiers far off were Colonials or regulars.

    Hope this helps.(y) Good luck with your figure.(y)
    cheers
    Richie
  10. ChaosCossack A Fixture

    Country:
    Canada
    This is awesome Richie!
    I really dig the rifle stock... looks like real wood. All the uniform colours, fleshtones, helmet, base... I believe this is my favourite of your recent figs. They all look great but this one I love

    Git 'er done (That's 'merican for Carry on Mate ;))

    Colin
    Richie likes this.
  11. pte1643 Active Member

    Cheers Richie.

    By Blackened, I meant a generalization of "Darkened" metalwork (Buckle and clips etc.), rather than actual black. I probably could have been clearer. ;)

    Even with stained equip generally the buckles, etc, still remain "bright"?

    Cheers for your help, not really that clued up on the Zulu Wars.

    Mark.
  12. Richie A Fixture

    Country:
    United-Kingdom
    Hi Colin,
    Thanks mate, actually it's the best Martini I've done so far! I think is down to two recent acquisitions of colours, Vallejo ochre brown for the base and Vallejo rust, the sprayable one for the washes before a couple of washes of burnt umber.

    Don't you worry my mate I'll Git 'er done(y)
    cheers
    Richie
  13. Richie A Fixture

    Country:
    United-Kingdom
    Hi Mark,
    Any time you want some help just shout mate(y). I would leave the buckles etc brass, they were not that advanced then. As for being clued up on the Zulu wars neither am I mate compared to some, honestly, it's just something I love..................bloody Cy Enfield.:ROFLMAO:
    cheers
    Richie
    Funky50 and pte1643 like this.
  14. housecarl Moderator

    Country:
    United-Kingdom
    Looking good Richie.
    Got me feeling guilty now, although mine is nearly done.:sneaky:
    Carl.(y)
  15. 1969 A Fixture

    Country:
    United-Kingdom
    This is starting to come together very nicely mate, excellent work on the rifle, will be watching :)

    Steve
  16. Wayneb A Fixture

    Country:
    United-States
    Hey Richie......it's all looking great.
    This whole thread is going in my file......If you decide to "bleach"or tone down the red;I'm leaning that way myself on a revisit of my Reid bust and would appreciate a tip or two on the best way to do that without getting into too much trouble.
    Looking forward seeing the finished work on a box and on my bench.....Keep it going friend..........Wayne
  17. T-34/85 PlanetFigure Supporter

    Country:
    United-States
    Excellent job Richie! Ron's right, the backdrop photos add to the desperation the figure represents(y)(y)
  18. Richie A Fixture

    Country:
    United-Kingdom
    Hi Mark,
    Forgot to add if my brass parts do look a little bit too bright, I tend to tone them down slightly with a thin wash or two of black, it also helps to get into the crevices and lifts the detail more.
    cheers
    Richie
  19. Richie A Fixture

    Country:
    United-Kingdom
    Hi Carl,
    Thanks mate, I'm sure yours will look the business.(y)
    cheers
    Richie
  20. Richie A Fixture

    Country:
    United-Kingdom
    Hi Steve,
    Thanks mate, I no there's no excuse now for not painting your rifle's to the same standard:sorry:
    cheers
    Richie

Share This Page

planetFigure Links

Reviews & Open Box
Buy. Sell & trade
Articles
Link Directory
Events
Advertising

Popular Sections

Figure & Minis News
vBench - Works in Progress
Painting Talk
Sculpting Talk
Digital Sculpting Talk
The Lounge
Report Piracy

Who we are

planetFigure is a community built around miniature painters, sculptors and collectors, We are here to exchange support, Information & Resources.

© planetFigure 2003 - 2022.