1. Copying kits is a crime that hurts original artists & producers. Help support your favorite artists by buying their original works. PlanetFigure will not tolerate any activities related to recasting, and will report recasters to authorities. Thank you for your support!

90mm horse for Fr. Line Lancer

Discussion in 'General Figure Talk' started by Kevin D., Dec 18, 2019.

  1. Kevin D. Well-Known Member

    Country:
    United-States
    Hey all,

    I am a great fan of the late Richard Almond. I have many of the Almond kits and am purchasing some that I may have already painted in the late 70's and 80's.

    I just scored an unopened kit of the French Light Horse Lancer. I painted it by itself way back when but would like to base it with a 90mm horse with appropriate Lancer furniture.

    Any thoughts, sources, or other help please?

    Thanks,

    Kevin D.
  2. Kevin D. Well-Known Member

    Country:
    United-States
  3. Richie A Fixture

    Country:
    United-Kingdom
    Hi Kevin,
    I have seen a blank 90mm horse somewhere, but would need the tack sculpting on it. Or do you want one already done?
    cheers
    Richie
  4. Blind Pew A Fixture

    Country:
    United-Kingdom
    I like the idea, big time. It is a good project. The only real fly in the soup is the remodelling of the existing horse furniture will most likely require getting rid of the blanket at the rear before doing anything else. I will tell you now that is a pig of a job, and you'll probably lose the will to live part way through.

    What may make life easier is to mark out on the blanket where you want the sheepskin to go. Basically I'd use the grenade on the blanket as a marker. If the sheepskin covers that then you've gone way too big and it would never look right. So that means getting rid of the remainder... The horse looks big enough already so beefing up the horse is not an option.

    It may be doable to conceal the horse blanket underneath a cloak or a cape or other blanket draped over the rear of the horse. it only has to be big enough to conceal the horse grenadier blanket underneath it. That way you only have to get rid of the lower right hand corner that is nearest the stirrup. So consider sculpting your way out...

    good luck!
    Nap likes this.
  5. Nap Moderator

    Country:
    England
    A great project and done great advice from others

    Hope we see the reworking here

    Happy benchtime

    Nap
  6. Hawk_Uk PlanetFigure Supporter

    Country:
    United-Kingdom
    Hi Richie,
    We have the David Grieve 90mm horse - plain no furniture at all standing at ease.

    Hi Kevin,
    Ping me a PM if your interested.

    Regards
    OldTaff likes this.
  7. Richie A Fixture

    Country:
    United-Kingdom


    Hi John,
    I new I had seen it, but have not had my second cuppa yet so the grey matter has not kicked in. Well done mate.
    cheers
    Richie
    Hawk_Uk and Nap like this.
  8. OldTaff PlanetFigure Supporter

    Country:
    England
    It's a David Grieve sculpt, so it will be a real 90mm scale, and should be ideal for your project, Kevin,......good luck, and look forward to seeing the end result (n)

    Alan
    Hawk_Uk likes this.
  9. Banjer A Fixture

    Country:
    England

    I have purchased one of these from John and it is a nice piece and well cast.

    Bill
    OldTaff and Hawk_Uk like this.
  10. Kevin D. Well-Known Member

    Country:
    United-States


    Richie, thanks for responding! Hopefully I can find one with tack already in place..... but I've seen nothing so far. If you think of something or stumble on one please shout out!!!

    Cheers,
    Kevin
  11. Kevin D. Well-Known Member

    Country:
    United-States
    Yep! I think, as far as having the pose that I want.... this may be my best bet..but you're right.... I may go the way of the do-do bird trying to get it done. I don't know which would be more difficult....building new furniture for the Grieve or using the given position of the wrong tack to use as a point of reference for scale and design. I think the latter...… I really like that draped cape thought.

    Kevin
    Blind Pew likes this.
  12. Kevin D. Well-Known Member

    Country:
    United-States


    Thank you Alan! For the moment I think my weak sculpting talents might be better used on the other horse option. I will definitely keep yours in mind. I took a quick look on line to remember the pose and it will certainly work if I need to go in tht direction.

    Thanks very much!!

    Kevin
  13. Kevin D. Well-Known Member

    Country:
    United-States


    Good to know Bill, Thanks very much..... hopefully I'm not biting off too much.... could be a nice presentation.

    K
  14. Kevin D. Well-Known Member

    Country:
    United-States


    Kev, This may be my new New Year project....

    Y'all keep an eye out for a calm posed horse 90mm with appropriate hardware if you could please!!

    Cheers and Merry Christmas!

    Kevin
    Nap likes this.
  15. Huw63 A Fixture

    FYI Bonaparte's do a grazing horse in 90mm and I think Poste Militaire harnessing for light cavalry is also available from them.

    Cheers

    Huw
    peedee and OldTaff like this.
  16. OldTaff PlanetFigure Supporter

    Country:
    England
    Ahh, you still can't beat the Poste Militaire 90mm's.....I'm working on the French Dragoon at the moment, and the castings from Bonaparte's are still as good as ever they were. Clean, crisp, minimal cleaning up and great fit of parts. IMHO a real compliment to the artistry and design of Ray Lamb (y):happy:.

    Alan
  17. Ray Stout Well-Known Member

    I'm sure I remember Poste Militaire doing a 90mm Mounted Hussar. Don't know if Bonaparrte bought the moulds for this, but, if they did, I'm sure they'd do a deal, as all the Tack would be available too, and nothing to take off. Ray
    polyphemus likes this.
  18. Kevin D. Well-Known Member

    Country:
    United-States




    Hey Hey Hey! BINGO Ray! I have the Poste Militaire 90mm hussar trumpeter. A friend found it in an estate sale, reasonably painted and got it for me. I stripped it and its ready to go including the furniture which will give me scale and an example to work from. I went ahead and bought the cuirassier horse from Bonaparte today to have the pose, stirrups etc and it is in resin to make conversion a bit easier. This might just come together, thanks all!

    Kevin D.
    Nap, peedee and OldTaff like this.
  19. Luis R. Active Member

    Country:
    Spain
    Fabrice Eisenbach produces excellent white metal multipose horses in 90mm (and 54mm) . Top pic shows the different parts produced and some examples in the bottom one

    [IMG]

    [IMG]
    malc, Kevin D., Nap and 2 others like this.
  20. hall-moye@msn.com Active Member

    Country:
    United-States
    These horses are great , I have several.
    Kevin D. likes this.

Share This Page

planetFigure Links

Reviews & Open Box
Buy. Sell & trade
Articles
Link Directory
Events
Advertising

Popular Sections

Figure & Minis News
vBench - Works in Progress
Painting Talk
Sculpting Talk
Digital Sculpting Talk
The Lounge
Report Piracy

Who we are

planetFigure is a community built around miniature painters, sculptors and collectors, We are here to exchange support, Information & Resources.

© planetFigure 2003 - 2022.