Bust Trapper - Acrylic Painting

Discussion in 'vBench (Works in Progress)' started by aldamodel, Jan 21, 2018.

  1. aldamodel Active Member

    Country:
    United-States
    Hello everyone, I'm going to prepare the whole process of painting done in this Del Trampero bust. I always use acrylic paint from the brands, Vallejo, Andrea, Army painter.
    I will put all the photographs of the painting process with the detail of the color mixtures and the brand.
    [IMG]
    We start with a mixture of colors Vallejo, 74003 reddish brown and a little 70876 brown sand...
    [IMG]
    [IMG]
    Once the entire base layer is applied, we proceed to paint the eyes with a look directed a little towards the left side. The color used for the eyeball is 70986 brown Vallejo cover, for the black + gray iris, for the turquoise blue 966 pupil with a rise of light with sky blue and for the reflection of the white pupil. Finished the eyes apply a very soft glaze of red near the tear.
    [IMG]
  2. Viking Bob PlanetFigure Supporter

    Country:
    United-Kingdom
    Following this one, great start.
    anstontyke likes this.
  3. clrsgt A Fixture

    Country:
    United-States
    Will be following this one with interest.
    anstontyke likes this.
  4. mick3272 PlanetFigure Supporter

    me too
    anstontyke likes this.
  5. Phater PlanetFigure Supporter

    Country:
    United-States
    Looks good. Interested to see this sbs.
    Tom
    anstontyke likes this.
  6. TERRYSOMME1916 Well-Known Member

    Country:
    United-Kingdom
    This SBS will be a great help to myself and others who are trying to get a result from using Acrylics so you are off to a good start with the eyes and your process for painting the flesh will be very interesting.
    TERRY
    anstontyke likes this.
  7. megroot PlanetFigure Supporter

    Country:
    Netherlands
    Gonna follow this very close.
    Considering a few years to stop with Oil and make the change to acrylic.

    Marc
    anstontyke likes this.
  8. Babelfish A Fixture

    Country:
    United-Kingdom
    Who makes the bust?

    - Steve
    anstontyke likes this.
  9. aldamodel Active Member

    Country:
    United-States
    That bust is discontinued for years, I have it for a long time.
    anstontyke and Babelfish like this.
  10. aldamodel Active Member

    Country:
    United-States
    We started with the first light rise, to the base color we added approximately 15% of color 70876 brown sand from Vallejo. Apply on the light areas in three or four very thin layers until the tone of the palette is on the face. First picture of the newly applied face painting, second picture once the paint dries on the face.
    [IMG]
    [IMG]
    [IMG]
  11. santi fernandez Active Member

    Country:
    Spain
    A great start here I stay to see how you develop, a civil greeting.
    anstontyke likes this.
  12. aldamodel Active Member

    Country:
    United-States
    We continue with the second light, to the mix we add 15% of the 70876 brown sand of Vallejo + 5% of 70845 golden meat of Vallejo.
    [IMG]
    Below I show the application areas for the second light.
    [IMG]
    [IMG]
  13. Roland Meng Member

    Country:
    Hungary
    Nice Explanation!
    anstontyke likes this.
  14. napoleonpeart Forum Moderator

    Country:
    England
    Excellent following with interest and making lots of notes!!!

    Well done on the SBS pictures and details

    Nap
    anstontyke likes this.
  15. santi fernandez Active Member

    Country:
    Spain
    I can only say that this is a great didactic thread, I follow you.
    anstontyke and napoleonpeart like this.
  16. Wayneb PlanetFigure Supporter

    Country:
    United-States
    This bust is looking good with a lot of potential....The SBS is helpful also....You said this is no longer available but I'm curious as to who produced this bust.

    Wayne
    anstontyke likes this.
  17. aldamodel Active Member

    Country:
    United-States
    This bust was produced by Accion Press, a Spanish publisher, was given with the subscription of a year to the magazine, I remember that more or less is from the year 1999 to 2001 approximately.
    anstontyke likes this.
  18. aldamodel Active Member

    Country:
    United-States
    Third Light, this time we added to the mixture 15% of 70815 base meat of Vallejo and 5% of light meat 70928 of Vallejo with a little more water each time we are cutting the area of application.
    [IMG]
    [IMG]
    [IMG]
  19. anstontyke PlanetFigure Supporter

    Country:
    United-Kingdom
    great sbs, following with great interest.

    tony
  20. phil_h A Fixture

    Country:
    United-States
    Very nice work, and thanks for the detailed steps and explanations.
    Phil
    anstontyke likes this.

Share This Page

planetFigure Links

Reviews & Open Box
Buy. Sell & trade
Articles
Link Directory
Events
Advertising

Popular Sections

Figure & Minis News
vBench - Works in Progress
Painting Talk
Sculpting Talk
Digital Sculpting Talk
The Lounge
Report Piracy

planetFigure Networks

Who we are

planetFigure is a community built around miniature painters, sculptors and collectors, We are here to exchange support, Information & Resources.

© planetFigure 2003 - 2012.